smart-psu-chip-opt.jpg

SOLID STATE POWER CONTROLLERS

rugged and highly reliable

PCI_800.915

PCI_800.915
  • 28VDC Continuous Input Voltage

  •  Nine independent channels

  •  ON/OFF capability for each channel

  •  Trip current capability for each channel

  •  Trip Reset capability

  •  Channel sequencing with user defined delays

  •  Dual RS485 interfaces for control

  •  Measurements of Input voltage, output voltage, output current for each channel

  •  12-/16-Bit ADC with ± 0.7% Error

  •  On board temperature of the Unit

  •  Trip/Fault Status (if Over Current / Short Circuit)

  •  Friendly GUI to set up and monitor

PCI_800.918

PCI_800.918
  • +/- 28VDC Continuous Input/Output Voltage

  • Sixteen independent channels at 25A max. each

  • Trip current and ON/OFF, trip reset capability for each channel

  • Channel sequencing with user defined delays,

  • Gigabit Ethernet interface

  • Optional CAN bus and MILbus 1553 interface

  • Measurements of Input, output voltage, output current for each channel

  • Trip/Fault Status (if Over Current / Short Circuit)

  • Build in Intel type COMe computer module

  • Friendly WINDOWS based GUI to set up and monitor all system parameters

PCI_800.916

PCI_800.916
  • 100VDC Continuous Input Voltage

  • Sixteen independent channels at 25A each

  • ON/OFF capability for each channel

  • Trip current capability for each channel

  • Trip Reset capability

  • Channel sequencing with user defined delays

  • Dual RS485 interfaces for control

  • Ethernet and MILbus interface

  • Optional CANbus interface

  • Measurements of Input voltage, output voltage, output current for each channel

  • 12-/16-Bit ADC with ± 0.7% Error

  • On board temperature of the Unit

  • Trip/Fault Status (if Over Current / Short

PCI_800.917

PCI_800.917
  • +/- 70VDC Continuous Input/Output Voltage

  • Sixteen independent +/- channels at 15A, 20A max. each

  • Trip current and ON/OFF, trip reset capability for each channel

  • VITA 83 compliant  Channel sequencing with user defined delays

  • Ethernet interface, Dual RS485 interfaces for control

  • Optional CANbus and MILbus 1553 interface

  • Dual Voltage (+/-) Tracking for each channel

  • Measurements of Input, output voltage, output current for each channel

  • Trip/Fault Status (if Over Current / Short Circuit)

  • Friendly WINDOWS based GUI to set up and monitor all system parameters